Nvidia NFORCE 650I Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Nvidia NFORCE 650I herunter. Nvidia NFORCE 650I User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 70
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
nForce 650i Ultra
Copyright
All rights are reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system or translated into any language or computer
language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of the company. Brands and
product names are trademarks or registered trademarks of their respective companies.
The vendor makes no representations or warranties with respect to the contents herein and
especially disclaim any implied warranties of merchantability or fitness for any purpose.
Further the vendor reserves the right to revise this publication and to make changes to the
contents herein without obligation to notify any party beforehand. Duplication of this
publication, in part or in whole, is not allowed without first obtaining the vendor’s approval
in writing.
Trademark
All the trademarks or brands in this document are registered by their respective owner.
Disclaimer
We make no warranty of any kind with regard to the content of this user’s manual. The
content is subject to change without notice and we will not be responsible for any mistakes
found in this user’s manual. All the brand and product names are trademarks of their
respective companies.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense. However,
there is no guarantee that interference will not occur in a particular installation.
CE Mark
The device is in accordance with 89/336 ECC-ENC Directive.
Ver: EG101
Seitenansicht 0
1 2 3 4 5 6 ... 69 70

Inhaltsverzeichnis

Seite 1 - Ver: EG101

nForce 650i Ultra Copyright All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retri

Seite 2 - User Manual

Mainboard nForce 650i Ultra 6Hardware Installation This section will assist you in quickly installing your system hardware

Seite 3 - Symbols

Mainboard nForce 650i Ultra 7FAN Headers: CPU FAN, C55 FAN There are several fan headers available for cooling fans on the

Seite 4 - Table of Contents

Mainboard nForce 650i Ultra 8How to enable Dual-Channel DDRII: 1. The mainboard provides Dual-Channel functionality for t

Seite 5 - Chapter 1. Getting Started

Mainboard nForce 650i Ultra 94. Repeat steps 1, 2 & 3 for the remaining RAM modules. Back Pane

Seite 6 - Specification

Mainboard nForce 650i Ultra 10Audio Ports: SOUND This mainboard provides six HD Audio ports for 8/6/4/2 channel playback c

Seite 7

Mainboard nForce 650i Ultra 11Connectors Floppy Disk Drive Connector: FLOPPY The mainboard provides a standard floppy dis

Seite 8 - Hardware Monitor Function

Mainboard nForce 650i Ultra 12Front Panel Headers: FRONTPNL FRONTPNL Pin Assignment Function Pin Assignment Func

Seite 9 - Configuration

Mainboard nForce 650i Ultra 13CASE OPEN COM1 Headers & Jumpers Case Open Warning Header: CASE OPEN This header is use

Seite 10 - Hardware Installation

Mainboard nForce 650i Ultra 14Clear CMOS Jumper: CLR_CMOS The “Clear CMOS” function is used when you are unable boot your

Seite 11 -

Mainboard nForce 650i Ultra 15Slots PCI-Express x16 Interface slot: PCIE x16 The mainboard allows you to install a graphi

Seite 12

Mainboard nForce 650i Ultra nForce 650i Ultra nVIDIA® nForce 650i Ultra MCPs Support Socket 775 Intel® C

Seite 13 - Back Panel Configuration

Mainboard nForce 650i Ultra 16Power Supply Attachments ATX Power Connector: ATXPWR, ATX12V This mainboard provides two AT

Seite 14

Mainboard nForce 650i Ultra 17Chapter 2. BIOS Setup Introduction This section describes PHOENIX-AWARD™ BIOS Setup program

Seite 15 - Connectors

Mainboard nForce 650i Ultra 18Main Menu Standard CMOS Features Include all the adjustable items in standard compatib

Seite 16 - Mainboard nForce 650i Ultra

Mainboard nForce 650i Ultra 19PnP/PCI Configurations Include all configurations of PCI and PnP ISA resources. System Mon

Seite 17 - Headers & Jumpers

Mainboard nForce 650i Ultra 20Chapter 3: Software Setup Software List Software Installation P

Seite 18 - Audio Configuration

Mainboard nForce 650i Ultra 21Windows® Vista Driver Windows® XP (64bit) Driver Attention Before you i

Seite 19

Mainboard nForce 650i Ultra 22Windows® XP (32bit) Driver Windows® 2000 Driver

Seite 20 - Power Supply Attachments

Mainboard nForce 650i Ultra 23 NVIDIA Chipset INF – It provides all drivers for the functions which built in both the Nort

Seite 21 - Chapter 2. BIOS Setup

Mainboard nForce 650i Ultra 24Chapter 4: Troubleshooting Problem 1: No power to the system. Power light does not illumina

Seite 22 - Main Menu

Mainboard nForce 650i Ultra 25Problem 4: System only boots from the CD-ROM. The hard disk can be read and applications can

Seite 23

Mainboard nForce 650i Ultra Attention- Important InformationFollow the procedures below… Troubleshooting Tips Refer to other

Seite 24 - Chapter 3: Software Setup

Mainboard nForce 650i Ultra 26Problem 10: Keyboard failure. Causes: Keyboard is disconnected. Solutions: Reconnect keyboar

Seite 25

Mainboard nForce 650i Ultra 27Appendix I: 8/6/4/2 Channel Setup Channels Setup for Windows Vista 1. After entering the

Seite 26

Mainboard nForce 650i Ultra 28Channels Setup for Windows XP/ 2000 1. After into the system, click the audio icon

Seite 27

Mainboard nForce 650i Ultra 29Appendix II: RAID Setup Introduction to RAID RAID (Redundant Array of Independent Disks)

Seite 28 - Chapter 4: Troubleshooting

Mainboard nForce 650i Ultra 30Before you create a RAID Array Before you configure your RAID Array, you have to enable the

Seite 29

Mainboard nForce 650i Ultra 313. After entering the sub-menu, arrow down to the "RAID Config"item. Press <Ent

Seite 30

Mainboard nForce 650i Ultra 325. At the main screen arrow over to the "Save & Exit Setup" item. Press <En

Seite 31

Mainboard nForce 650i Ultra 331. When the system boots up during the POST (Power-On Self Test), you will be given an oppor

Seite 32

Mainboard nForce 650i Ultra 34 Item Description á RAID Mode Choose the RAID Mode you wish to con

Seite 33 - Appendix II: RAID Setup

Mainboard nForce 650i Ultra 35á Stripe Block Stripe block size will directly affect performance when data is written to o

Seite 34

Mainboard nForce 650i Ultra Table of Contents CHAPTER 1. GETTING STARTED ...

Seite 35

Mainboard nForce 650i Ultra 36Creating a New Array 1. The screen you will see upon initial configuration is the “Define a

Seite 36

Mainboard nForce 650i Ultra 373. <Tab> over to the “Free Disks” selection box, and use the up/down arrow keys to sel

Seite 37

Mainboard nForce 650i Ultra 384. After all of the options are properly configured, press <F7>. A confirmation box wi

Seite 38

Mainboard nForce 650i Ultra 396. In the next page, you will see the “Array List” screen as shown below. You can press <

Seite 39

Mainboard nForce 650i Ultra 408. When you see the screen below, please confirm the information about the RAID arrays you h

Seite 40

Mainboard nForce 650i Ultra 412. Then you will see an alert box to notify you that you selected an invalid number of disks

Seite 41

Mainboard nForce 650i Ultra 42Deleting Array 1. If you want to delete an existing array, go to the “Array Detail screen a

Seite 42

Mainboard nForce 650i Ultra 433. After the array is deleted successfully, you will return to the main screen where you can

Seite 43

Mainboard nForce 650i Ultra 44Configuring a Bootable Array Use the up/down arrow keys to select an array. Then press <B

Seite 44

Mainboard nForce 650i Ultra 45Install Windows® XP OS onto your RAID HDDs This section will explain how to install the Wind

Seite 45

Mainboard nForce 650i Ultra 1Chapter 1. Getting Started Introduction Thanks for choosing the nForce 650i Ultra mainboar

Seite 46

Mainboard nForce 650i Ultra 463. Select your mainboard. The example used below is “NF 680i SLI” mainboard. 4. Click

Seite 47

Mainboard nForce 650i Ultra 475. Press the “Save” button to download the RAID zip file. You must unzip the file and save th

Seite 48

Mainboard nForce 650i Ultra 48Install Windows® XP 1. During the Windows® XP installation, a “Windows Setup” screen will

Seite 49

Mainboard nForce 650i Ultra 493. Insert the media which includes the “RAID Driver” into your computer. Press <Enter>

Seite 50

Mainboard nForce 650i Ultra 505. When you see the screen shown as below again, press <s> to download the second RAID

Seite 51

Mainboard nForce 650i Ultra 517. You have finished RAID drivers installation. Press <Enter> to continue the Windows®

Seite 52

Mainboard nForce 650i Ultra 52Install Windows® Vista OS onto your RAID HDDs This section will explain how to install Windo

Seite 53

Mainboard nForce 650i Ultra 533. Select your mainboard. The example used below is “NF 680i SLI” mainboard. 4. Click “D

Seite 54

Mainboard nForce 650i Ultra 545. Press the “Save” button to download the RAID zip file. You must unzip the file and save th

Seite 55

Mainboard nForce 650i Ultra 55Install Windows® Vista 1. During a Windows® Vista installation, there will be an item “Load

Seite 56

Mainboard nForce 650i Ultra 2Specification CPU Support Socket 775 Support Intel® CoreTM 2 Extreme/ CoreTM 2 Quad/ Core

Seite 57

Mainboard nForce 650i Ultra 563. Select the media which includes the RAID Drivers. 4. The example here is “fl

Seite 58

Mainboard nForce 650i Ultra 575. Select the “NVIDIA nForce RAID Controller” and click “Next” to locate this driver. Please

Seite 59

Mainboard nForce 650i Ultra 587. Click on “Browse” to browse into the folders of the media to locate the folder with the fi

Seite 60

Mainboard nForce 650i Ultra 599. Select “Floppy Disk Drive(A:)” and click “OK” to load the RAID Drivers. The system will re

Seite 61

Mainboard nForce 650i Ultra 6011. You will return to the “Install Windows” screen to continue with the installation. Follo

Seite 62

Mainboard nForce 650i Ultra 61Rebuilding a RAID Mirrored Array This section will illustrate how to replace a failed drive

Seite 63

Mainboard nForce 650i Ultra 625. You should see the existing RAID array on your system. Press <R> to rebuild the arr

Seite 64

Mainboard nForce 650i Ultra 637. An alert box will display for your confirmation to rebuild array. Press <Enter> to

Seite 65

Mainboard nForce 650i Ultra 649. You have successfully finished the setup of rebuilding an array in the “NVIDIA RAID Setup

Seite 66

Mainboard nForce 650i Ultra 6511. The Rebuild process is automatic. You can check of the Rebuild in the following steps. G

Seite 67

Mainboard nForce 650i Ultra 32. Two PCI-E x1 slots: supports up to x1 mode with 250 MB/s one-way bandwidth Three PCI int

Seite 68

Mainboard nForce 650i Ultra 6613. When the rebuilding is finished, make sure the “Status” item for your Rebuild Array show

Seite 69

Mainboard nForce 650i Ultra 4 Support APM 1.2 Support ACPI 2.0 power management Green Function Supports ACPI (Advanc

Seite 70

Mainboard nForce 650i Ultra 5Configuration Layout of nForce 650i Ultra

Kommentare zu diesen Handbüchern

Keine Kommentare